5.6
Changing the ride data display
If you want to display different ride data on the
main page, press the Display button briefly. Each
TRIP
press will display new ride data. This always
km
BOOST
appears in the same sequence:
Ride data display
Press the display button briefly
TRIP
Driving route
TOTAL
Total kilometres
RADIUS
Range
TIME
Travel time
Ø km/h
Average speed
MAX
Maximum speed
PEDAL FREQUENCY
Number of crank rotations
TIME
Current time
EN-34
Original User Guide | Pedelec Shimano Steps E8000 Version 1
5.7
Configuring settings in the main menu
You cannot navigate to the main menu, nor can you
configure any settings in this menu when the bicycle is
being moved or ridden.
To configure settings in the main menu, the system must be
switched on, and the start screen must be visible.
5.7.1
Accessing the main menu
1. If the start screen is displayed, press the Display button for three
seconds. You are now in the main menu.
BOOST
Press the display button
Main page
for three seconds
5.7.2
Navigating within a menu
1. Use the / buttons to navigate to the required option.
The option selected is shown with a light background.
2. To confirm your selection, press the Display button briefly.
You will then either move to the next lowest menu level or confirm your
setting.
Setting
Clear
Clock
km/h
Bluetooth LE
Main menu