Shimano STEPS E8000 Originalbetriebsanleitung Seite 100

6.3.1.3 Bluetooth LE
Bluetooth LE is radio technology which allows devices within a radius
of approximately 10 metres to connect to each other. You can connect
the Pedelec display via Bluetooth LE to your smartphone or tablet and
exchange data between the two. To do this, you must however first install
the "E-Tube Project" app on your smartphone or tablet.
Download and install "E-Tube Project"
1. You can download the "E-Tube Project" app from e-tubeproject.
shimano.com. You will also find installation and operating instructions
for the app there.
Connecting the Pedelec display to the smartphone/tablet
No connection can be established between the display and
your smartphone/tablet while loading.
To connect your Shimano Steps E8000 to a PC, you will need
SM-PCE1 and SM-JC40/JC41.
1. Launch "E-Tube Project" on your smartphone or tablet.
2. Set the app to receive Bluetooth LE signals.
3. Switch the Shimano Steps E8000 system on using the
Bluetooth LE connection launches automatically. Once the connection
is successful, the Shimano Steps logo will appear on the display
screen. Then appears the name of the unit in "E-Tube Project".
EN-40 Original User Guide | Pedelec Shimano Steps E8000 Version 1
Bluetooth LE: connected
The Pedelec display does not connect to the smartphone/tablet
If the connection cannot be established successfully, for example if
the signal is too weak, the connection can also be launched from the
"Bluetooth LE" main menu item.
1. Navigate to "Bluetooth LE" as described in  5.7 Configuring settings
in the main menu Page
You can choose between:
Start
Cancel
2. Select "Start" using the /
buttons. The selection is highlighted
white.
button. The
EN-34.
Start the Bluetooth LE transfer.
The connection process is interrupted.
For 2. Bluetooth LE: Start transfer
Bluetooth LE
Start Abbrechen