Braking; Chain - Shimano STEPS E8000 Originalbetriebsanleitung

3.6

Braking

Make sure that you can always reach the brakes comfortably and that you
are familiar with their operation and position. Note which brake lever
operates the front and rear brakes. If your pedelec is fitted with a back
pedal or coaster brake, you can operate it by pedalling backwards.
DANGER
Practise braking in a safe place before venturing into road traffic. In
some instances, the braking effect can be different or stronger than
what you are used to. If you do not take the time to familiarise yourself
with the braking effect, you could cause a serious accident. Practise
until you feel safe. Dismount if you ever feel unsafe.
Rim brakes: Avoid continual, uninterrupted
braking on long downhill stretches because
it causes the braking effect to diminish and/
or tyre damage. Brake intermittently with
intervals in between to allow the airflow to
cool the braking system.
If necessary, make regular stops to ensure
Rim brake
adequate cooling.
Replace the brake pads when they reach the safe wear limit. Using
worn brake pads can result in serious injuries with fatal consequences.
CAUTION
Disc brakes: Avoid touching the brake discs
after intensive use of the brakes – they can
become very hot. You could burn yourself if
you touch them.
Disc brake
3.7

Chain

Bicycle chain
WARNING
Always switch off the pedelec and unplug the motor plug on the motor
before starting work on the pedelec. You risk being seriously injured if
the system is still switched on.
1. Switch off the pedelec using the button.
2. Remove the motor casing.
3. Unplug the round power supply plug on the motor.
Original User Guide | Pedelec Shimano Steps E8000 Version 1 EN-21