Warning Code - Shimano STEPS E8000 Originalbetriebsanleitung

9. Fault
9.1 Codes
9.1.1 Warning codes
W arning codes appear in the top centre of the display. They disappear when the problem has been resolved. Follow the
solution listed in the table in order to resolve the problem.
Display of a warning code

Warning code

Description
W010 Pedal assistance may be lower
than normal.
W011 No riding speed is displayed.
W013 Pedal assistance may be lower
than normal.
W032 The pedal assistance provided
in [GO] mode is maybe lower
than normal.
Cause Remedy
Motor is too hot. Ride without assistance until the motor cools off. If the warning code reappears, contact your
dealer.
The switch-off speed is maybe Check whether the speed sensor is installed correctly. If the warning code reappears, contact your
lower than normal. dealer.
The torque sensor is possibly
Take your foot off the pedal, press the
not fully initialised.
reappears, contact your dealer.
An electrical gear shift is Reinstall the derailleur for which the system was designed. If the warning message reappears,
maybe installed instead of a contact your dealer.
mechanical gear shift.
key and turn the system back on. If the warning code
Original User Guide | Pedelec Shimano Steps E8000 Version 1 EN-53