Battery Charge Level; Changing Assist Mode - Shimano STEPS E8000 Originalbetriebsanleitung

Switching on from standby
Press the button on the top tube for two
seconds. The button is lit blue. An acoustic
signal is heard. The Shimano Steps logo
appears on the display monitor, followed
shortly thereafter by the main page.
5.3

Battery charge level

The battery charge level is shown in the top left
of the display. Information is displayed on a
battery-shaped icon with five segments, telling
km/h
you how full the battery is charged. The lower
BOOST
the battery charge level, the fewer segments
Display of battery charge level
are displayed. If the battery drops below its
minimum charge level, the support system will
first switch to ECO, and if the charge drops
further, the motor support will switch off.
Symbol
Shimano Steps logo
km
Main page
* The battery charge level display flashes red when the remaining charge falls below this level.
5.4
1. You must be in the start menu to change
the assist mode. Select the level of assist
you require by briefly pressing the /
buttons.
Battery charge level
81 – 100 %
61 – 80 %
41 – 60 %
21 – 40 %
1 – 20 %*
0 %

Changing assist mode

Original User Guide | Pedelec Shimano Steps E8000 Version 1
/
For 1. Press the button
EN-31