Shimano STEPS E8000 Originalbetriebsanleitung Seite 112

The charging display symbols can vary. If you are not sure
what the symbols mean, contact your cycle dealer.
8.2.1 LED display on the charger
The LEDs on the battery charger display the state of the charger.
Symbol Description
The green LED flashes.
The green LED flashes
rapidly.
!
The green LED is lit
continuously.
!
!
The red LED flashes rapidly.
!
EN-52 Original User Guide | Pedelec Shimano Steps E8000 Version 1
8.3
8.3.1
Meaning
The battery charger is
connected to the mains
network.
The battery is charging.
The battery is fully charged.
1. Remove the charging cable from the battery charging socket.
Charging fault
2. Unplug the charger from the mains socket.
3. Clean the casing with a slightly damp, soft cloth.
4. If the contacts are dirty, clean them with a soft dry cloth.
8.3.2
1. Store the battery charger in a dry, not excessively warm room. The
Tips
Cleaning
DANGER
Always unplug the charger from the mains before cleaning and
especially before wiping it, otherwise you could get an electric shock
if you touch the contacts.
IMPORTANT
Do not immerse the charger in water. Damage may still result even
though the components are sealed.
Do not use any cleaners which contain alcohol or solvent, or which
scour. No coarse sponges or brushes may be used either. They leave
scratches and cause the surface to become matt. Clean the charger
with a soft damp cloth.
Storage
charger should not be exposed to direct sunshine. The recommended
storage temperature range is 18 to 23 °C.