Technical Details - Shimano STEPS E8000 Originalbetriebsanleitung

CAUTION
Do not open the drive unit. There is a risk of electric shock. It will also
invalidate any warranty claim. Only have repairs to the drive unit car-
ried out by trained cycle dealers.
Do not touch the motor after riding at full load. It can become very
hot. You could burn yourself if you touch it.
IMPORTANT
All components mounted on the drive unit, and all other drive
components, may only be replaced with identical components or those
approved specially for your pedelec by the manufacturer. Otherwise it
may result in overloading and damage.
Do not open the display; you may damage it beyond repair.
At low temperatures, the display can react slowly. Observe
the operating temperature of the display
details Page EN-36.
EN-36 Original User Guide | Pedelec Shimano Steps E8000 Version 1
6.2
Drive unit
Type
Nominal power
Max. torque
Nominal voltage
Cut-off speed
Permissible ambient
temperature in operation
Storage temperature
Recommended storage
temperature
Protection class
Weight
 6.2 Technical

Technical details

Brushless electric motor (DU-E8000)
Free-wheel
250 W
70 Nm
36 V
25 km/h
-10 to +40 °C
-10 to +50 °C
18 to 23 °C
IP 54
2.88 kg