Configuring Settings In The Main - Shimano STEPS E8000 Originalbetriebsanleitung

6.3.1.7 Unit
1. Navigate to the "Unit" item as described in "Configuring settings in the
main menu".
You can choose between:
km Display in kilometres
mile
Display in miles
2. Use the / buttons to select the unit required. The option selected is
shown with a white background.
3. Press the Display button to confirm. You return to the main menu.
6.3.1.8 Language
The "Language" main menu item allows you to select the language in
which the display text appears.
1.
Navigate to "Language" as described in  5.7 Configuring settings in
the main menu Page EN-34.
You can choose between:
» English
» Français
» Deutsch
» Nederlands
» Italiano
» Español
Beep
ON
OFF
Activate km
Language
English
Français
Deutsch
Select English
2. Use the / buttons to select the language required.
The language selected is shown with a white background.
3. Press the Display button to confirm. You return to the main menu.
6.3.1.9 Settings
You can use the "Settings" main menu item to set the electronic gear shift
on your Pedelec – if you have one.
6.3.1.10 Derailleur reset
A violent fall can disrupt the mechanical connection in the derailleur, and
the derailleur can easily fold inward. Proceed as follows to return this to
the correct position:
1. Navigate to the main menu item
"Derailleur reset" as described in

5.7 Configuring settings in the main

menu Page EN-34.
You can choose between:
OK The derailleur returns to the correct position.
Cancel
The adjustment process is interrupted.
2. Use the / buttons to select the desired option. This has a white
background.
3. Press the Display button to confirm.
Original User Guide | Pedelec Shimano Steps E8000 Version 1
RD protection reset

Cancel
For 1. Bring derailleur back to the correct
position
EN-43