Shimano STEPS E8000 Originalbetriebsanleitung Seite 101

3. Confirm by pressing the Display button. The Bluetooth LE connection
starts. Once the connection is successful, select the device name from
the list on screen. If the connection is not successful, "Connection
failure" will appear on the display.
Bluetooth LE
Now connecting
To setting
For 3. Bluetooth LE connection initiating
4. Regardless of whether the connection is successful or not, press the
Display or / buttons. Otherwise, the display screen will switch back
automatically to the menu overview after a short time.
Interrupt the connection between the Pedelec display and smartphone/
tablet
You have three ways in which to interrupt the Bluetooth LE connection:
Pressing the Display button
Press the Display button. The connection is interrupted and the main menu
appears.
Cancel
Otherwise, navigate from the "Bluetooth LE" main menu item to "Cancel".
Stop transfer from smartphone/tablet
Otherwise, interrupt the transfer from your smartphone or tablet. The
display exits connection mode and switches to normal operating mode.
Bluetooth LE
Connect failure
For 3. Bluetooth LE connection failure
6.3.1.4 Bluetooth LE/ANT
Exactly like Bluetooth LE, ANT is radio technology for transferring data
between different devices. This launches automatically when the system
is switched on using the button. ANT sends the following information
to the display: Battery charge level, setting values and positions for front
derailleur and rear derailleur.
You can display the current status of the wireless connection on the
display screen. Proceed as follows:
1. Navigate to "Bluetooth LE/ANT" as described in  5.7 Configuring
settings in the main menu Page
2. Press the Display button to display the current status of the wireless
connection.
Three different display texts may appear:
Display
Shimano Steps logo
ANT
Not connected
Connected via Bluetooth LE Connected via ANT
3. Confirm and return to the main menu by pressing the Display button.
Original User Guide | Pedelec Shimano Steps E8000 Version 1
EN-34.
Connection status
Connected via Bluetooth LE
Connected via ANT
Not connected
Bluetooth LE / ANT Bluetooth LE / ANT
Disconnected
ANT
Not connected
EN-41