Compliance With Regulations; Ce Marking; Protection Class; Electrical Diagram Of The System - Ingeteam INGECON SUN String Control 320 Handbuch Für Montage Und Betrieb

Unit description

2.3. Compliance with regulations

2.3.1. CE marking

CE marking is mandatory for the sale of any product within the European Union, without prejudice to standards or
laws. These units have CE marking by reason of their compliance with the following directives:
• Low Voltage Directive 2006/95/EC.
• Electromagnetic Compatibility Directive 2004/108/EC.
Low Voltage Directive
These units comply with this directive by means of compliance with the applicable parts of standards:
• EN 62109-1 Safety of power converters for use in PV power systems. Part 1: general requirements.
• EN 62109-2 Safety of power converters for use in PV power systems. Part 2: Specific requirements for
inverters.
Electromagnetic Compatibility Directive
These units comply with this directive by means of compliance with the applicable parts of harmonised standards:
• EN 61000-6-2 Electromagnetic Compatibility. Part 6-2: Generic standards - Immunity for industrial
environments.
• EN 61000-6-4 Electromagnetic Compatibility. Part 6-4: Generic standards - Emission for industrial
environments.
Compliance with these standards calls for compliance with limits and procedures in other standards of the same
series.

2.4. Protection class

These units meet IP65 protection class against external agents.

2.5. Electrical diagram of the system

1
2
3
16
1
2
3
16
AAS2011IQM01_ - Installation and usage manual
Isolating switch
(optional)
Arresters
(optional)
Isolating switch
(optional)
Ingeteam
DE
EN
ES
FR
IT
PT
45