Life Phases; Electric Cylinder Scope Of Delivery; Transport And Storage - Phoenix Mecano Lambda Montageanleitung

7.1 Electric cylinder scope of delivery

The electric cylinder will be delivered as an individual component.
The controllers and handsets and accessories are not included in delivery.

7.2 Transport and storage

The product is to be checked by suitable personnel for visible and functional damage.
Damage caused by transport and storage must be reported to the responsible person and
Phoenix Mecano Komponenten AG immediately.
Putting damaged electric cylinders into service is forbidden.
The ambient conditions for the storage of the electric cylinder are prescribed as follows:
•
No oil-contaminated air
•
Contact with solvent-based paints must be avoided
•
Lowest/highest ambient temperature: -20 °C/+60 °C
•
Relative humidity: from 30 % to 75 %
•
Air pressure: from 700 hPa to 1060 hPa
•
Falling below the dewpoint is not allowed
Divergent environmental factors must be approved by Phoenix Mecano Komponenten AG.

7. Life phases

43