Safety; Safety Instructions - Phoenix Mecano Lambda Montageanleitung

5.1 Safety instructions

Phoenix Mecano Komponenten AG has built this electric cylinder according to the current state of
the art and existing safety regulations. Nonetheless, this electric cylinder can pose risks to persons
and property if it is used improperly or for a non-intended use or if the safety instructions are not
observed.
Correct operation guarantees high performance and availability of this electric cylinder.
Faults or conditions which can impair safety are to be rectified immediately.
Every person who is involved in the assembly, use or operation of this electric cylinder must have
read and understood these assembly instructions.
This includes:
•
understanding the safety instructions in the text and
•
being familiar with the arrangement and function of the various operating and application
options.
Only nominated persons may use, install and operate the electric cylinder. All work on and with
the electric cylinder may only be carried out in accordance with this assembly instruction. For this
reason, this assembly instruction must always be kept in a location near the electric cylinder and
stored safely.
The general, national and company safety regulations must be observed. Responsibilities for the
use, assembly and operation of this electric cylinder must be clearly stipulated and observed so
that no unclear situations can arise with regards to safety aspects. The operator must always
ensure that no person or object remains in the danger area around the electric cylinder before
putting into operation. The user must only use the electric cylinder if it is in perfect condition. Any
change is to be reported to the nearest line manager immediately.

5. Safety

35