Life Phases; Lifting Column Scope Of Delivery; Transport And Storage - Phoenix Mecano Alpha Colonne Montageanleitung

7.1 Lifting column scope of delivery

The Alpha Colonne lifting column will be delivered as an individual component.
The hand switches and controls are not part of the scope of delivery.
•
After receiving this lifting column, check the device for possible damage and missing
components.
•
Immediately notify Phoenix Mecano Komponenten AG of any faults found.

7.2 Transport and storage

The product is to be checked by suitable personnel for visible and functional damage.
Damage caused by transport and storage must be reported to the responsible person and
Phoenix Mecano Komponenten AG immediately.
It is forbidden to put damaged lifting columns into operation.
The following ambient conditions are specified for storing the lifting column:
•
No oil-contaminated air
•
Contact with solvent-based paints must be avoided
•
Lowest/highest ambient temperature: -20 °C/+60 °C
•
Relative humidity: from 30 % to 75 %
•
Air pressure: from 700 hPa to 1060 hPa
•
Falling below the dewpoint is not allowed
Divergent environmental factors must be approved by Phoenix Mecano Komponenten AG.

7. Life phases

55