15. Remaining aspirate may be recovered for examination by reinserting stylet
or flushing device.
16. For additional cell collection from the same lesion, gently reinsert the stylet
into the metal fitting on the needle handle. Note: Prior to reinserting the stylet,
wipe with saline or sterile water. While supporting the sheath at the Luer lock
fitting, advance the stylet in small increments, until the hub is engaged in the
fitting.
17. Additional samples may be obtained by repeating Step 3 of "System
Preparation" through step 15 of the "Instructions for Use".
18. To remove adapter from endoscope, pull back on the locking clip, lift the
top and slide off endoscope.
Upon completion of the procedure, dispose of the device, including the
adapter, per institutional guidelines for biohazardous medical waste.
11