Having checked the position of the two aileron flaps (see section 11. a)) before mounting the lower wing, all you have to check now is the correct moving direction
of the aileron.
First switch on the transmitter. Then switch on the model. The aileron trim lever (see fig. 2, pos. 5) has to be in centre position. If the left (1) or the right (2) aileron
points slightly upwards or downwards, you can accurately set the required length of the aileron linkage by turning the respective clevis, thus exactly adjusting the
aileron (also see fig. 5b and 5c).
If you move the right control stick on the transmitter to the left (see fig. 2, pos. 4), the left aileron (1) must deflect upwards by approx. 1.2 cm and the right aileron
(2) must deflect downwards by approx. 1.2 cm.
If you move the right control stick on the transmitter to the right (see fig. 2, pos. 4), the left aileron (1) must deflect downwards by approx. 1.2 cm and the right
aileron (2) must deflect upwards by approx. 1.2 cm.