Reely Soarwing Bedienungsanleitung Seite 29

The following components not included in delivery are required for assembly and operation:
Assembly:
• Sharp cutter
• 5-minute epoxy resin and thixotropic agent (micro-balloon or cotton flock) for thickening the resin or super glue with
activator spray
Attention!
Observe the safety information of the respective manufacturer when using glues and work with glues in
well-ventilated rooms only.
• Sanding paper
• Soldering gun with all accessories necessary for soldering
• Tools: Various screwdrivers, drill with different small drills
Operation:
The following components are required for operation and need to be purchased separately:
• 2.4 GHz-remote control system with at least 3 channels; additionally suitable batteries/rechargeable batteries for the
transmitter
• 2 micro servos with at least 18 Ncm thrust
• Brushless electric motor (as of approx. 120 W input power)
• Flight controller matching the electric motor (from a permanent current of approx. 20 A, with integrated BEC)
• Folding propeller (as of approx. 22.8 x 12 cm or 9 x 5")
• 3-cell LiPo flight battery with capacity as of approx. 1000 mAh
• Plug + coupling for the flight battery
• LiPo charger and charging cable for charging the flight battery
See our catalogues or our website at www.conrad.com for tried and tested accessories.
29