K) Installing The Wings For Flight Operation - Reely Soarwing Bedienungsanleitung

The canopy closure must be glued in from the inside in the rear part of the cabin hood (3). For this, measure the
correct position with the canopy put on and pushed into the longitudinal slots (1).
Produce a matching oblong hole for the pushers.
When everything is perfect, glue the canopy closure on with 5 minute epoxy resin. The canopy closure is pushed into
the hole (figure 13, item 4) of the first mounting plate (behind the first attachment dowel).

k) Installing the Wings for Flight Operation

Place the wing on the fuselage and apply two
elastic rings each lengthwise and twice crossed
between the dowels at the fuselage for flight
operation.
Figure 14
41