Mechanical Installation; Accessories (Optional) - LumaSense Technologies mpac IN 140/5-L Betriebsanleitung

IMPAC pyrometers IN 140/5 · IN 140/5-H · IN 140/5-L
5

Mechanical Installation

For mounting the pyrometer is equipped with a mounting rail on the bottom. This rail allows easy fixing of an
adjustable mounting angle or a ball and socket mounting. Another possibility for fixing the pyrometer are 4
thread holes M 5 on the front of the instrument.
5.1

Accessories (optional)

Numerous accessories guarantee easy installation of the pyrometer. The following overview shows a selec-
tion of suitable accessories. You can find the entire accessory program with all reference numbers on sec-
tion 15, Reference numbers.
Mounting:
For mounting and aligning the pyrometer to the meas-
ured object a mounting angle or a ball and socket
mounting is available.
The ball and socket mounting is an easy way to align the
pyrometer to the measured object. The quick-clamping-
screws of the ball and socket mounting enable an easy
and fast adjustment of the pyrometer in all directions.
Cooling:
The pyrometer can be used in ambient temperatures
outside of the specifications if preventive maintenance is
taken.
The cooling plate is used to protect the pyrometer from
heat coming from the front. The completely covered
water cooling jacket made from stainless steel protects
the pyrometer if exposed to a hot environment. It is de-
signed for ambient temperatures up to 180°C.
Displays:
Additionally to the built-in temperature indicator of the
pyrometer LumaSense offers several digital displays
which can also be used for remote parametrizing of the
pyrometer.
Miscellaneous:
The air purge protects the lens from contamination with
dust and moisture. It has to be supplied with dry and oil-
free pressurized air and generates an air stream shaped
like a cone.
The scanning attachment SCA 140 moves the measur-
ing beam of the pyrometer from 0 to 12°. This angle is
adjustable to smaller values. The scanning frequency is
as well adjustable from 1 to 5 Hz. In most cases the
scanning attachment SCA 140 is used as a peak picker
for measuring smaller objects like thin wires which may
be moving.
The 90°-mirror enables the capture of objects at an an-
gle of 90° to the pyrometer axis.
10
Ball and socket mounting
Water cooling jacket
LED large display
Digital display DA 6000
Scanning attachment SCA 140
Air purge
Mounting angle
Cooling plate
90° mirror