Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPAC pyrometers IN 140/5 · IN 140/5-H · IN 140/5-L
© LumaSense Technologies 2009. All rights reserved.
LumaSense Technologies
3033 Scott Blvd.
Santa Clara, CA 95054-3316
Tel.: +1 408 727-1600
Fax: +1 408 727-1677
Internet: www.lumasenseinc.com
E-mail:
info@lumasenseinc.com
support@lumasenseinc.com
Please call 800-631-0176 for Factory Repair and Return
•
There are no user-serviceable components in the instrument
•
Disassembly of the instrument is not allowed, and the warranty is VOID if the instrument is disassem-
bled, tampered with, altered or otherwise damaged, without prior written consent from LumaSense
Technologies or if considered by LumaSense Technologies to be abused or used in abnormal condi-
tions.
•
No adjustments may be made to the targeting laser. It is fixed at the factory.
•
No adjustments may be made to the targeting laser's power level.
General
Information about the user manual
Congratulations on choosing the high quality and highly efficient IMPAC pyrometer.
Please read this manual carefully, step by step, including all notes to security, operation and maintenance
before installing the pyrometer. For installation and operation of the instrument this manual is an important
source of information and work of reference. To avoid handling errors keep this manual in a location where
you always have access to. When operating the instrument it is necessary to follow the general safety in-
structions (see section 3, Safety).
Additionally to this manual the manuals of the components used are valid. All notes – especially safety notes
– are to be considered.
Limit of liability and warranty
All general information and notes for handling, maintenance and cleaning of this instrument are offered ac-
cording to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any examples or proc-
esses mentioned in this manual or in case the content of this document should be incomplete or incorrect.
LumaSense Technologies reserves the right to revise this document and to make changes from time to time
in the content hereof without obligation to notify any person or persons of such revisions or changes.
All series 140 instruments from LumaSense Technologies have a warranty of two years from the invoice
date. This warranty covers manufacturing defects and faults which arise during operation only if they are the
result of defects caused by LumaSense Technologies.
The Windows compatible software was thoroughly tested on a wide range of Windows operating systems
and in several world languages. Nevertheless, there is always a possibility that a Windows or PC configura-
tion or some other unforeseen condition exists that would cause the software not to run smoothly. The manu-
facturer assumes no responsibility or liability and will not guarantee the performance of the software. Liability
regarding any direct, or indirect damage caused by this software is excluded.
Copyright
All copyrights reserved. This document may not be copied or published, in part or completely, without the
prior written permission of LumaSense Technologies GmbH. Contraventions are liable to prosecution and
compensation. All rights reserved.
2
LumaSense Technologies
16 Thornton Road
Oakland, NJ 07436
Tel.: +1 201 405-0900
Fax: +1 201 405-0090
Internet: www.mikroninfrared.com
E-mail:
mikroninfo@lumasenseinc.com
Werbung
Kapitel
Inhaltsverzeichnis
