Siemens SINUMERIK 840D sl Installationshandbuch Seite 970

System konfigurieren
2.3 Anwenderspezifische Einstellungen beim Hochlauf
SeqAct=262143
# Filtering Concurrent Keys
# =========================
# Definition and selection of function keys (buttons) which shall not be
# pushed in parallel or at the same time (function keys F1-F12 and
# additional hardkeys).
# If more of these buttons are pushed at the same time, the system removes the
# code of these buttons except the code of the button which was pushed first.
# This function of the keyboard-driver is activated by ConcurrentKeyEnable.
# ConcurrentKeyMask holds a BIT-Pattern for a max of 17 function keys, which
# must not be pushed simultaneously (concurrently). If bit-n is set in
# ConcurrentKeyMask, the corresponding button is supervised.
# The following 17 function keys are implemented:
# F1
# F2
# F3
# F4
# F5
# F6
# F7
# F8
# F9
# F10
# F11
# F12
# PAGE-UP (NUMLOCK) Alarm Hardkey on Operator Panel
# PAGE-DOWN (NUMLOCK) Tool Management Hardkey on Operator Panel
# HOME (NUMLOCK) Program Manager Hardkey on Operator Panel
# END (NUMLOCK) Program Hardkey on Operator Panel
# CURSOR-DOWN (NUMLOCK) Alarm Hardkey on Operator Panel
Hinweis
Umfang der Tasten
Es können nur die Tasten, die bereits in der Datei system.ini definiert sind, freigegeben
werden.
Es können keine zusätzlichen Tasten zum Filtern definiert werden.
Siehe auch
ServiceCenter Users: Einstellungen für Benutzer (Seite 12)
54
Inbetriebnahmehandbuch, 02/2012, 6FC5397-1DP40-3AA0
PCU-Basesoftware (IM8)