GRAUPNER Jet Ranger Handbuch Seite 29

Contents
• Foreword .............................................
• Warnings .............................................
• Accessories, extra items required ............................
• 1. Assembling the model ..................................
1.1 Preparation, explanatory notes
•
1.2 Creating the access opening for the mechanics
•
1.3 Installing the mechanics
•
1.4 Tail rotor
•
1.5 Stabiliser panels ...................................
•
1.6 Installing the silencer ................................
•
1.7 Completing the upper fuselage fairing and tail cap ...........
•
1.8 Applying the colour decals ............................
•
1.9 Installing the glazing panels ...........................
•
1.10 Receiver aerial ....................................
•
1.11 Centre of Gravity ..................................
•
• 2. Setting up
..........................................
• 3. Final checks before the first flight ..........................
• 4. Maintenance
• 5. Fitting the starter adaptor ................................
• 6. Adjustments during the first flight, blade tracking ...............
Notes on adjusting the motor
•
• 7. General safety measures ................................
• 8. Basic helicopter terminology
The instructions
We have invested considerable effort in producing these instructions, with the aim of ensuring
that your model helicopter will fly reliably and safely.
Please take the trouble to follow the instructions step by step, exactly as described, as this
guarantees a successful outcome. This applies to you whether you are a relative beginner or an
experienced expert.
• Certain sections of the model are supplied pre-assembled, but they still need to be checked
and adjusted before use. It is entirely up to the modeller to ensure that all screws and other
joints are correctly seated and tight, and that all adjustments and set-up procedures are
completed correctly.
• The comprehensive illustrations show how the model is constructed; be sure to read the
instructions which accompany the drawings.
• All the joints marked with this symbol
e.g. Order No. 952, or bearing retainer fluid, Order No. 951. Remove all traces of grease
from the joint surfaces before applying the fluid.
.............................
........................................
........................................
............................
.............................
........................
............
need to be secured with thread-lock fluid,
5
Jet Ranger
P.2
P.3
P.6
P.7
P.7
P.7
P.8
P.9
P.12
P.13
P.13
P.13
P.13
P.14
P.15
P.16
P.19
P.19
P.19
P.20
P.21
P.22
P.23