Intended Use; Purpose; Contraindications; Side Effects - Sutter Curis Bedienungsanleitung

NOTE
In the chapters that follow, the numbers in brackets, for example (X), represent the item
numbers of the display and control elements in the illustrations of the front and rear of
the device.

2.2 Intended use

2.2.1 Purpose

The Sutter irrigation pump is indicated to provide sterile isotonic saline solution for improved
procedural site visualization.

2.2.2 Contraindications

No contraindications that apply to the product directly are known at this time. The safety measures
described in Chapter 5

2.2.3 Side effects

No side effects that apply to the product directly are known at this time. To avoid unintended
effects, the safety measures described in

2.2.4 Essential performance characteristics

The Sutter CURIS flow Irrigation pump has no essential performance characteristics.
®

3 Commissioning

NOTE
To avoid unintentional irrigation, the irrigation pump has to be switched off during setup.
Position the CURIS
®
Alternatively, the CURIS
scope can be used to connect the irrigation pump to an IV stand (
5
have to be observed in addition.
flow Irrigation pump on a sturdy, horizontal surface.
flow IV pole mounting bracket (REF: 360901) that is part of the delivery
®
Chapter 5 have to be observed.
To do so, attach the IV pole mounting bracket to
a corresponding IV stand. Then connect the IV
pole mounting bracket to the irrigation pump
using the connection socket (13) on the bottom
of the device. Use the supplied mounting screws
for this purpose.
NOTE
When the IV pole mounting bracket is
mounted on an IV stand, check for tipping
resistance and ensure this is maintained
at all times.
Ø
15 - 25mm).