Additional Operating Functions - Sutter Curis Bedienungsanleitung

WARNING
Prior to operation, make sure that the lock lever of the rotary pump (8) is closed.
Failure to comply can cause injury to the user!
The CURIS
to 20. When the recommended bipolar cord / tubing set or irrigation tubing is used,
these correspond to 0 to 20 ml/min.
Check the selected flow setting before each use and adjust if required.
NOTE
In principle, select the lowest flow setting for the required irrigation and
increase the flow rate if needed.
Turn the control element (3) to select the desired flow rate. The selected flow setting is
shown on the display (2).
NOTE
The flow setting can be increased by turning the control element (3) clockwise
or decreased by turning it counterclockwise. The flow setting can be changed
during operation.
To supply irrigation fluid to the surgical area, press and hold the footswitch (blue COAG
pedal) connected to the RF generator or the CURIS
connected to the irrigation pump. Release to interrupt the supply of irrigation fluid.
NOTE
Make sure that sufficient irrigation fluid is available at all times. If needed, change the
irrigation fluid bag before it is entirely empty.

4.1 Additional operating functions

The device is equipped with the following additional operating functions.
Flush function
Pause function
flow Irrigation pump offers the possibility to select 20 flow settings from 0
®
The flush function can be activated with the button (4) on the front of the
device or the additional push-button on the footswitch. It activates the
irrigation pump with the maximum flow setting. Irrigation fluid is supplied as
long as the button (4) or push-button on the footswitch is activated.
The flush function can be used to prime the irrigation tubing,
see chapter 3.6, point 10.
The pause function can be activated / deactivated with the button (6) on the
front of the device. The supply of irrigation fluid is paused and the flow setting
on the display starts flashing.
While using the irrigation pump together with the CURIS
connection is interrupted, and the RF generator can be activated without
supplying irrigation fluid.
flow one-pedal footswitch
®
RF Generator, the
®
10