Maintenance And Repair; Accessories - Sutter Curis Bedienungsanleitung

The LED status indicator
(5) lights up red and the
error message "E" is
shown on the display
during the operation

7.1 Maintenance and repair

The irrigation pump does not contain any parts that can be maintained or repaired by the user.
The product may only be repaired by the manufacturer or persons/organizations authorized by the
manufacturer. Otherwise the warranty and any possible additional liability claims against the
manufacturer are voided.
Contact your Sutter representative or the manufacturer for repair or replacement.
Warning
Unauthorized changes can cause malfunctions or failure of the irrigation pump.

8 Accessories

Sutter Medizintechnik GmbH recommends the following tested, compatible accessories:
•
CURIS flow one-pedal footswitch with push-button (REF: 360115)
®
Product availability depends on regulations in various markets and may vary as a result.
To avoid injury to the patient and/or operating personnel, only use the device with
accessories and single-use items for which safe, unproblematic use is confirmed.
If untested accessories of other manufacturers that are not included in the scope of
delivery for the device or approved as accessories by the manufacturer and that are
connected to the interfaces of the device are to be used, these have to verifiably comply
with the corresponding EN specifications (for example, EN 60601 for electromedical
devices). Any person who connects additional devices is a system configurator and
therefore responsible for compliance with the current version of the system
15
Internal defect
REF: 360115
Turn the irrigation pump off with the
power switch (1) on the front of the
device, check all connections, and
turn the device back on with the
power switch. If the LED status
indicator (5) still lights up red,
contact your Sutter representative
or the manufacturer.