Servicing, Maintenance And Troubleshooting; User Advice; Maintenance - Atlantic Explorer Installations- Und Bedienungsanleitung

Presentation

Servicing, Maintenance and Troubleshooting

1. User advice.

The water heater must be drained when the Absence mode cannot be used or when the appliance is powered
off. Proceed as follows:
❶ Turn off the power supply.
❸ Open a hot water tap.

2. Maintenance.

In order to maintain the performance of your water heater, it is recommended to perform regular servicing.
By the USER:
What
Safety unit
General condition
Condensate drainage
Check the hydraulic sealing
The appliance must be switched off before opening the covers/column.
By the PROFESSIONAL:
What
Ductwork
Condensate drainage
The electrical connection Once a year
Installation
When
Once or twice a month Operate the safety valve.
Monthly
Once a year
Once a year
When
Once a year
Once a year
Use Maintenance
❷ Close the cold water inlet.
❹ Open the safety unit drain valve.
How
Check that the flow is correct.
Check the general condition of your appliance: no error
codes, no water leaks from the water connections, etc.
Check the cleanliness of the condensate drain pipe.
Check that there are no signs of seepage:
- hot / cold water connector
- electric heating element hatch seal
How
Check that the water heater is connected to the ducts.
Check that the ducts are in place and not crushed.
Check that the ventilation system is not obstructed
(ducts, wall or roof inlets and outlets).
Check the cleanliness of the condensate drain pipe.
Check that no wires are loose on the internal and
external wiring and that all the connectors are
in position.
Warranty