Preparing The Machine - Fuxtec Fx-Rmt84M Bedienungsanleitung

•
Too high speed
•
Ineffective braking performance
•
unsuitable choice of machine for the terrain,
•
Insufficient knowledge of the soil conditions (e.g. slope),
•
improper use as a towing vehicle.

Preparing the machine

•
Always wear non-slip, sturdy work shoes and protective gloves during use.
•
Inspect the work area thoroughly and remove all objects that could be thrown away or damage
the cutting tool or motor (e.g. stones, branches, wire, bones).
CAUTION: Fire hazard! Gasoline is highly flammable:
•
Only store fuel in approved containers.
•
Only refuel outdoors and never near an open fire or with the engine running.
•
Refuel before starting the engine. Never remove the fuel filler cap and do not top up with fuel
when the engine is running or hot.
•
Close the tank cap carefully after refueling.
•
Replace defective silencers immediately.
•
Check the condition of the battery regularly. If the housing, cover or terminals are damaged,
have them professionally repaired or repositioned.
•
All safety covers must be fitted before commissioning (e.g. grass catcher, side ejection guard
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
48
Use the tool supplied for
safe filling.
If fuel is spilled, do not
start the engine. Move the
machine away from the
spilled area and avoid any
sources of ignition until the
fuel has evaporated.