Fuxtec FX-RMT84M Bedienungsanleitung Seite 74

Dismantling
•
A screw: Loosen the right-hand thread → anticlockwise
•
B screw: Loosen left-hand thread → clockwise
Reassembly
•
Ensure that the concave part of the damping disk is in contact with the blade.
•
Insert the shaft hubs and keys correctly and check that they are securely seated.
Tightening the screws
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
75