Start And Stop The Mower; Stopping The Motor - Fuxtec Fx-Rme38 Bedienungsanleitung

45.

Start and stop the mower

PULL IN
OPC LEVER
Release the lever. The motor stops, but the knife
can still rotate for a few more seconds. Do not
carry out any work on the mower until you are
sure that the blade has stopped completely.
Manual_FX-RME38_Int24_rev1
PRESS RED
BUTTON

Stopping the motor:

63
The grass collector is equipped with
a fill level indicator. When the
mower is in operation, air flows
through the opening and lifts the
flap. As soon as the grass catcher is
full, no more air passes through the
opening and the flap closes.
To start the motor, connect the
mower to the power supply using an
extension cord. Then first press the
safety button in the middle of the
panel and keep it pressed. Then pull
one of the levers to start the engine.