Storage - Fuxtec Fx-Rmt84M Bedienungsanleitung

MOUNTING THE ANTI-SCALP WHEELS
Fit the anti-scalp wheel (2) to the mower deck (1) using 1 screw (3), 1 washer (Ø8×Ø25×2.5) and 1 nut
(M8).
Carry out the same installation step on the opposite side.

27. STORAGE

•
WARNING! Always remove the ignition key before carrying out cleaning or maintenance work
and follow the safety instructions carefully. Wear suitable clothing and protective gloves to
avoid injury.
•
WARNING! Never use the machine with damaged or worn parts. These must be completely
replaced - repairs are not permitted. Only use original spare parts.
•
Non-original or improperly installed parts can jeopardize operational safety, cause accidents
and injure persons. The manufacturer accepts no liability in such cases.
•
Maintenance and adjustment work that is not expressly described in these instructions may
only be carried out by authorized specialist workshops or your specialist dealer.
•
Only there will suitable equipment and qualified personnel be available to maintain the
machine safely in accordance with the manufacturer's specifications.
•
Maintenance work carried out by unauthorized persons or workshops voids all warranty
claims and the manufacturer's liability.
•
Remove the ignition key after each use and check that it is intact.
•
Tighten all screws, nuts and bolts regularly to maintain operational safety. Regular
maintenance is crucial for safety and performance.
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
62