Fuxtec FX-RMT84M Bedienungsanleitung Seite 68

OPERATING BUTTON FOR THE REVERSE MOW OPTION (RMO)
The RMO button is located to the left of the throttle lever and enables mowing while driving in reverse.
By default, the mower is automatically deactivated as soon as the machine reverses. However, if
mowing in reverse is required, the RMO button can be pressed to keep the blades active.
Note:
Mowing in reverse is not recommended for safety reasons.
Only do this if you have full visibility and control of the rear area.
Application:
Hydrostatic transmission / automatic transmission the mower drive is engaged.
To drive in reverse gear with the mower drive engaged, proceed as follows:
1. Press the RMO button.
2. Press the reverse pedal.
Manual gearbox the mower drive is switched on
To drive in reverse gear with the mower drive engaged, carry out the following steps:
1. Press the brake pedal.
2. Shift into reverse gear.
3. Press the RMO button.
4. Slowly release the brake pedal.
Important: if you don't press the RMO button, the blade is automatically stopped. This is a safety
regulation.
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
69