Maintenance; Safety Recommendations; Scheduled Maintenance - Fuxtec Fx-Rmt84M Bedienungsanleitung

1. Close the fuel tap,
2. Lower the cutting table completely,
3. Apply the parking brake,
4. Securely fasten the machine with sturdy ropes or chains to prevent it from slipping or tipping
during travel.

31. MAINTENANCE

Only use original accessories and original spare parts.
Only a regularly maintained and treated device can serve as a satisfactory aid.
Inadequate maintenance and care can lead to unforeseen accidents and injuries.

SAFETY RECOMMENDATIONS

•
Before carrying out any cleaning or maintenance work, remove the ignition key and read the
relevant safety instructions carefully.
•
Wear suitable work clothing and protective gloves, especially if there is a risk of injury to the
hands.
•
Never use the machine with damaged or worn parts.
•
Defective components must be completely replaced - repair is not permitted.
•
Only use original spare parts from the manufacturer.
•
Inferior or unsuitable parts can lead to machine damage and safety risks - both for you and
for other people.
•
Never dispose of used oil, fuel, batteries and other environmentally harmful substances
improperly.
•
Only use approved collection points or recycling centers to protect the environment and
comply with legal requirements.

scheduled maintenance

Carry out the following maintenance work regularly according to the specified
operating hours. For detailed information, please also consult the engine manual.
Maintenance measure
Checking the fastening and sharpness of the blades
Replacing the blades
Checking the drive belt
Replacing the drive belt
Checking the knife band
Replacing the knife band
Drive adjustment and control
Checking the blade brake / engagement mechanism
Checking bolts and screws
General lubrication of all moving parts
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
MACHINE
72
Interval (operating hours)
every 25 hours
every 100 hours
every 25 hours
-
every 25 hours
-
every 10 hours
every 10 hours
every 25 hours
every 25 hours