Fuxtec FX-RMT84M Bedienungsanleitung Seite 58

MOUNTING THE FRONT BUMPER
Fasten the front bumper to the underside of the frame using four screws (M8×25).
MOUNTING THE COMPONENTS OF THE REAR GUIDE PLATES
1. Fasten the two brackets (2) to the frame (1) with 4 screws (M8×25) and 4 nuts (M8).
2. Fit the rear plate (3) to the brackets using 2 screws (M8×25) and 2 nuts (M8).
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
59