Fuxtec FX-RMT84M Bedienungsanleitung Seite 55

NOTICE:
To prevent damage to the cutting deck, raise it to the maximum cutting height before removing the
machine from the pallet. Be extremely careful when doing so.
MOUNTING THE STEERING WHEEL
Place the machine on a level surface and align the front wheels straight.
Then carry out the following installation steps:
1. Place the sleeve (1) on the steering shaft.
2. Attach the lower steering wheel cover (2) to the steering column base (3) and secure with two
screws (ST5.0×16).
3. Fit the steering wheel (5) and secure using the washers (6) and the Allen key supplied.
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
56