Display Of Verification Measurements On Ride Heights - Dover Vsg Rot.r51Hd Übersetzung Der Originalanleitung

TABLE OF CONTENTS
7.4.4

Display of VERIFICATION MEASUREMENTS on RIDE HEIGHTS

Some manufacturers (for example: Citroen, Peugeot) provide tolerance values referred to special measurements on the vehicle chassis
(control values).
1
The program displays a page as shown in the following example; select the F9 key or tap key (1) to enlarge the image.
Enter the control values in the fields (2).
2
2
When the selected vehicle has tolerance values with control values, key (1) is present on the technical
data page.
Tap this key to view the page with details of the control values.
Tap these keys to scroll through the options of the various fields to be filled in.
Tap this key to confirm the entered values.
ROT.R51HD - SPA.BA6HD - RAV.TD600
1
2015-M364-0 EN-25