TABLE OF CONTENTS
3.6.3
Low battery warning
•
Charge the sensor as soon as possible.
Tap this key to exit the page.
3.7
STDA92E CLAMPS
Special clamps for wheels with oscillation compensation: by referring to the centre of the wheel, which is almost perfectly precise,
they can provide a more accurate measurement without the need to lift each wheel position to compensate for the oscillation.
Each pair of clamps includes: 6 short adapters and 6 long adapters
1
Sensor pin locking knob
2
Handles for the quick attachment of the clamp to the wheel
3
Short adapters
Long adapters
4
When the residual charge of one or more measuring heads is LESS than or EQUAL to 30%, the program
displays an error notification with details of the battery charge percentage.
This signal is also emitted on the sensor itself with the flashing of the red power LED (see para. 3.6.1).
2
1
3
NOTE:
each clamp has a label with warnings for hands and to refer to this manual before use.
ROT.R51HD - SPA.BA6HD - RAV.TD600
2
Front right sensor
charge low
4
2015-M364-0
EN-13