Dover VSG ROT.R51HD Übersetzung Der Originalanleitung Seite 136

TABLE OF CONTENTS
• Move the rear sensor heads from the rear axle to the 2nd
steering axle, press F4 to continue.
Important: hold the steering wheel and/or the steering box still.
Note: The toe adjustment for this axle can be skipped by pressing
F2, or all other axles can be skipped by going directly to the final
results page by pressing F3.
• Position the rear sensor heads (mounted on the 2nd steering
axle) in such a way that they are visually level and brake
them with the appropriate knobs. Leave the front sensor
heads in their position.
• Wait for the next page to be displayed automatically.
• Adjust the 2nd steering axle, the camber (release first) and
the toe, if possible and necessary.
• Press F4 to continue.
NOTE: During this step, it is not possible to adjust the toe as this
operation would have been performed already.
The page where it is possible to print or save the diagnosis and
adjustment data is then displayed.
• Press F3 to open the page showing the total toe
adjustment.
• Press F2 to display the page opposite and
proceed to adjust the rod of the 2nd steering axle, observing
the display on the right.
Note: Using the rear reference axle, the procedure involves
another step in which the rear sensor heads must be mounted on
the 2nd steering axle.
EN-62 2015-M364-0
ROT.R51HD - SPA.BA6HD - RAV.TD600