Sensor Keypads; Automatic Sensor Switch-Off - Dover Vsg Rot.r51Hd Übersetzung Der Originalanleitung

TABLE OF CONTENTS
3.6.1

Sensor keypads

1
2
RED LED on steady
1
RED LED flashing
Control keypad:
Scroll back in program
Scroll up the menu
Sensor power button.
2
Scroll down the menu
Scroll forward in program
Tap them at the same time to switch off the sensor manually.
GREEN LED
3
3.6.2

Automatic sensor switch-off

The sensors switch off automatically after about 5 min when the program is not transmitting and/or receiving data for the measurement
(e.g.: on the home page) or if the tablet is switched off.
It is possible to switch off the sensors manually when they are not used (see table in para. 3.6.1).
EN-12 2015-M364-0
ROT.R51HD - SPA.BA6HD - RAV.TD600
The sensor is on
The sensor battery is low (when the remaining battery charge is
lower than or equal to 30%); it will turn off after a few minutes.
The sensor battery is charging.
3