Display Of Additional Measurements On Ride Heights - Dover Vsg Rot.r51Hd Übersetzung Der Originalanleitung

TABLE OF CONTENTS
Tap this key to display a single
column of consistent values
for the left and right sides.
NOTE: The PC Tablet with CCD SW contains technical information, relating to motor vehicles, provided through official databases.
Access to the system and to the information is subject to reading and accepting a disclaimer, which is displayed on the device when
the SW is used for the first time.
7.4.3

Display of ADDITIONAL MEASUREMENTS on RIDE HEIGHTS

Some manufacturers (for example: Mercedes, Renault) provide angle tolerance values based on certain measurements on the vehicle
chassis.
1
The program displays a page as shown in the following example; use the symbols (2) to display the various images, tap on the image
to enlarge it.
2
Tap this key to continue with the preliminary operations on the vehicle.
When the selected vehicle has angle tolerance values linked to additional measurements on the chassis,
key (1) is present on the technical data page.
Tap this key to view the page with details of the chassis measurements.
ROT.R51HD - SPA.BA6HD - RAV.TD600
2015-M364-0 EN-23