TABLE OF CONTENTS
7.12 REAR AXLE ADJUSTMENT
The following screen appears.
Measurements of the
rear camber angles.
Measurements of the
rear partial toes.
Adjustment, where permitted, in the following order:
Rear camber - Rear partial toe (this also determines the thrust angle).
EN-36
2015-M364-0
Tap this key on the screen of Para. 7.11 after preparation for adjustment is complete.
Tap this key to run the "Jack-Hold" procedure, adjustment with the wheels raised (Para. 7.13.2).
Tap this key to display other adjustment aid images (if present).
Tap this key to display the "chassis diagnosis" (graphic-geometric representation of the axles of the
vehicle the operator is working on -
Tap this key to continue with adjustment of the front axle (Para. 7.13).
ROT.R51HD - SPA.BA6HD - RAV.TD600
).
Para. 7.14.1
Thrust angle
measurements.