Dover VSG ROT.R51HD Übersetzung Der Originalanleitung Seite 130

TABLE OF CONTENTS
• Press F4 to confirm the selected 3-axle semi-trailer.
Note: The selected number of axles can still be changed with the
key or with F3.
• A screen appears with the measurements and tolerances
provided by the manufacturer. The data indicated below
refers to the axle highlighted in the top left corner. Tap the
top left corner of the screen to view the data of the other
axles.
• Press F4 to continue.
• Mount the STDA49N adapter to align the trailer.
• Mount the front sensor heads on the last semi-trailer axle.
• Press F4 to continue.
• Adjust the front sensor heads until they are level and brake
them with the appropriate knobs.
• Wait for the next page to be displayed automatically.
• Adjust the camber, the toe and the thrust angle where
possible and necessary.
• Press F4 to continue.
EN-56 2015-M364-0
ROT.R51HD - SPA.BA6HD - RAV.TD600