Dover VSG ROT.R51HD Übersetzung Der Originalanleitung Seite 103

TABLE OF CONTENTS
Position indicator
6
7 First point of arrival of rotation
At the start of the procedure, a "self-calibration" is run so that the position indicator is positioned upwards. As the wheel is rotated
manually, the wheel position is updated in real time on the screen, as is the relative position indicator.
The first goal is to rotate the wheel by approximately 180°, to reach the first highlighted point.
The wheel can be rotated in either direction.
At this point, it is necessary to rotate the wheel until the position indicator is aligned with the second point, positioned at 180° with
respect to the first position and thus coinciding with the starting point.
When the last rotation has been performed, the program acquires the last measurements.
Current wheel position.
Rotate the wheel by 180° and, once the destination has been reached, tap the centre key of the sensor
head keypad.
The word "STOP" will be displayed for about three seconds, the time it takes for the program to acquire
the measurements.
Rotate the wheel by another 180° and, once the destination has been reached, tap the centre key of
the sensor head keypad.
ROT.R51HD - SPA.BA6HD - RAV.TD600
6
7
2015-M364-0 EN-29