Printing The Measurements - Dover Vsg Rot.r51Hd Übersetzung Der Originalanleitung

TABLE OF CONTENTS

7.16 PRINTING THE MEASUREMENTS

F3
Print example key:
1 - Manufacturer's logo
2 - Space reserved for customisation of workshop data
3 - Date and time of the test
4 - Identification data of the tested vehicle and owner
5 - Factory data of the vehicle being tested
6 - Diagnosis data of the vehicle being tested
7 - Data of the vehicle being tested after adjustment
8 - Front axle data table
9 - Rear axle data table
10 - Space reserved for notes that can be entered manually
EN-44 2015-M364-0
Tap this key on the main "Diagnosis and Adjustment" page (Para. 7.14); the following screen is displayed
Tap this key on the main "Diagnosis and Adjustment" page (Para. 7.14); the program opens the auxiliary
options menu (Para. 7.15).
Tap this key; the test is saved in the "customer database" of performed tests.
The data contained in the "customer database" can be accessed from the home page (Para. 7.3)
Tap this key.
Tap this key; a preview of the printout of the performed test will be shown
Tap this key to end the test and go back to the home page.
Tap this key to switch between tabular (left example) and graphical (right example) printing
Tap this key; a preview of the printout of the performed test will be shown
ROT.R51HD - SPA.BA6HD - RAV.TD600
Vehicle data and entry of
customer data