Herunterladen Inhalt Inhalt Diese Seite drucken

Saving The Tests With Teq-Link; Teq-Link Function Configuration - Dover Vsg Rot.r51Hd Übersetzung Der Originalanleitung

Achsmessgeräte lastkraftwagen
Inhaltsverzeichnis
TABLE OF CONTENTS

7.17 SAVING THE TESTS WITH TEQ-LINK

At the end of the test, it is possible to save the report with the results and all the vehicle data using the "TEq-Link" function.
The "TEq-Link Web Manager" software must be installed on a Personal Computer connected to the workshop computer network and
the Tablet connected to the same data structure.
NOTE: A request to enable this function must be submitted in advance to the manufacturer, communicating the serial no. of your
device, as well as a request to configure the App with the references of the PC where the "TEq-Link Web Manager" software is installed.
After finishing the test, when entering the customer data, it is possible to save the results of the test by tapping the "Blue" key (Para.
7.16).
When the tests carried out are stored, their results are immediately accessible from any PC or mobile device in the network shared
with the Tablet.
7.17.1

TEq-Link function configuration

Before saving the test with the TEq-Link functionality, it is necessary to insert the references of the PC where the "TEq-Link Web
Manager" software is installed.
From the system configuration menu (Para. 7.2) access the "Application configuration" / "TEq-Link connection" settings, then enter
the IP address of the PC on which the "TEq-Link Web Manager" software is installed.
For further details, see the TEq-Link functions configuration manual (cod. M0215, paragraph 3.2).
At this point, from any PC or mobile device connected to the same network, by simply entering the IP or the name of the PC with the
"TEqLink Web Manager" SW in the browser address bar, it is possible to access the home page from which the saved tests can be
managed, as shown in the figure below.
Using any PC or mobile device in the same
network, by simply entering the IP in the browser
address bar. (A) or the name of the PC with the
"TEqLink Web Manager" software, the main page
for managing the saved tests opens (B).
ROT.R51HD - SPA.BA6HD - RAV.TD600
A
B
2015-M364-0
EN-49
Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Vsg spa.ba6hdVsg rav.td600

Inhaltsverzeichnis