Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Always use a pressure setting as low as
possible.
5. Start the pump by pressing the
values are shown on the display.
6. The bar on the top display section moves from left to
right and indicates the suction time.
7. The suction time is followed by the pause time. The
bar on the top display section now moves from right
to left and indicates the suction time.
8. Press the
button again to stop the suction.
9. You are returned to the overview screen:
10. Switch off the device by pressing and holding the
button for 3 seconds.
If you experience a high volume of secretion or you want to suction without a pause during
rinsing, press the
pause. Repeat this step if necessary.
button. Two
button twice at the start of the pause time or as required to skip the
Page 27 of 44
Werbung
