Fahl DYSSUCTION Suction Device M Gebrauchsanweisung Seite 68

PRESSURE ADJUSTMENT
As soon as the device is switched on the pressure settings can be individually adjusted.
The pressure can be set within a range of -60 mbar to -300 mbar (in 10 mbar steps).
Use pressure settings that have been approved by the treatment doctor.
LANGUAGE SELECTION
German is set as the default language. Proceed as follows to set the language:
1. Press the OK button for 1 to 2 seconds
device. The following start screen appears:
2. Press the two arrow keys
screen is displayed. The menu
3. Select the menu
4. Confirm your selection with the
SETTING SUCTION AND PAUSE TIMES
The suction and pause times can be set when starting the device. Proceed as follows to set the times:
1. Press the OK button for 1 to 2 seconds
device. The following start screen is shown for 5 seconds:
2. Press the
Parameters
The menu
3. Select the Parameter menu with the
4. Confirm your selection with the
5. Now use the
minimum suction time is 10 seconds and the maximum 60
seconds (adjustable in 1-second steps, default suction time: 20
seconds).
6. Confirm your selection with the
7. Now use the
[min.]. The minimum pause time is 3 minutes and the maximum
Page 24 of 44
simultaneously while the start
Einstellung / Setup
Sprache / Language
with the
button.
arrow keys while the start screen is displayed.
opens.
button.
arrow keys to set the suction time [sec.]. The
button.
arrow keys to set the prescribed pause time
to switch on the
opens.
arrow keys.
to switch on the
arrow keys.