Scheppach MR230-61 Originalbetriebsanleitung Seite 67

Lawn turns yellow, • Mowing blade is not sharp
uneven mowing • Cutting height is too low
results
• Cutting height is too low
• Mowing blade worn out
• Catch basket is clogged
The discharge of
• Chute blocked
grass clippings is
• Grass too wet
unclean
• Driving speed too high
The mower does not • Battery discharged
start with the electri- • Fuse burnt out
cal start
• The driving speed in relation to the cutting
Motor output drops
during mowing
Braking power insuf- • The brake is no longer set correctly
ficient
height is too high
www.scheppach.com · service@scheppach.com
• Sharpen the mowing blade
• Set the correct height
• Set height
• Replace the mowing blade
• Empty the catch basket or remove the
blockage
• Clean the ejector chute
• Mow during dry weather
• Choose a lower gear
• Charge battery
• Replace the fuse
• Reduce the driving speed and increase
the cutting height
• Contact the specialist merchant/custom-
er service
GB | 67