Scheppach MR230-61 Originalbetriebsanleitung Seite 51

• if the device starts to vibrate unusually strongly. Im-
mediate review is required.
• when leaving or transporting the device.
Residual risks and accident protective measures
Neglect of ergonomic principles
Negligent use of personal protective equipment
(PPE)
Careless use or omission of personal protective equip-
ment may result in serious injury.
- Wear prescribed protective equipment.
Human behaviour, misconduct
- Always concentrate fully on all work.
m Residual risk can never be ruled out.
Danger from noise
Hearing damage
Prolonged unprotected work with the device may
cause hearing damage.
- Always wear hearing protection as a matter of
principle.
Behaviour in an emergency
In case of an accident, initiate the necessary first aid
measures and seek medical assistance as quickly as
possible.
7. Technical data
Type of motor
Displacement
Idle speed
Power
Fuel
Tank capacity / petrol
Engine oil
Oil tank capacity
Cutting height adjustment
Catch basket capacity
Cutting width
Cut height
Weight
4-Stroke engine / air
cooled
224 cc
1800 rpm
+/-100
4.4 kW/ 6 HP
Regular grade petrol/
lead-free max. 10%
bioethanol
1.8 l
SAE 30 / 10W30
0.5 l
5-level
150 l
61 cm
35-75 mm ±5 mm
120 kg
www.scheppach.com · service@scheppach.com
Driving speed V
Driving speed R
Front wheels
Air pressure front wheels
Rear wheels
Air pressure rear wheels
Protection class LED
Rechargeable battery / battery charger
The technical data for the rechargeable battery and
battery charger can be found in the accompanying op-
erating manual.
Attention!
The device is part of the Scheppach 20 V IXES series
and can be operated with rechargeable batteries of the
Scheppach 20 V IXES series. The rechargeable bat-
teries may only be charged with chargers of the Schep-
pach 20 V IXES series.
Subject to technical changes!
Information about noise level measured in accordance
with applicable standards (EN ISO 5395):
Sound pressure L
PA
per ISO 5395-1:2013
Measurement uncertainty K
Sound power level L
WA
per ISO 5395-1:2013
Measurement uncertainty K
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Vibration a (body)
h
per ISO 5395-1
Vibration a (Hand-Arm - Steering Wheel)
h
= 3.662m/s / 3.522m/s
2 2
Per ISO 5395-1
Measurement uncertainty K = 1.5 m/s
Keep the noise level and vibration to a minimum!
• Only use faultless products.
• Maintain and clean the product at regular intervals.
• Adapt your working methods to the product.
• Do not overload the product.
• Have the product checked if necessary.
• Switch the product off if it is not in use.
• Wear protective gloves.
1.5, 2.0, 4.0, 6.0 km/h
2.4 km/h
10x4,00-4
1.5 bar
13 x 5.00-6
1.8 bar
IP66
= 84.7 dB
= 3 dB
= 96.59 dB
= 1.69 dB
= 1.261 m/s
2
2
GB | 51