Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This petrol ride-on lawnmower must not be towed. A
suitable vehicle or trailer must be used for transport
on public roads. When transporting, ensure that the
transport device has sufficient payload-bearing capac-
ity and that the petrol ride-on lawnmower is suitably
safeguarded.
The transport bar (11) is used to recover a stuck ma-
chine. If recovery with a tow rope is not possible, use a
tow bar. Always ensure that the tow bar does not have
any visible damage and can withstand the resulting
forces.
Keep the loading area and the area around the silenc-
er and combustion engine free of combustible materi-
als such as straw, leaves or dry grass cuttings during
transport.
Always remove the ignition key (18a) from the ignition
lock (18) after loading!
13. Cleaning and maintenance
m WARNING!
Danger of injury and burning!
The product can start unexpectedly and cause inju-
ries. In addition, temperatures of 80° C and more can
be reached.
- Switch off the motor before carrying out any clean-
ing or maintenance work.
- Allow the device to cool down before working in
the area of the combustion engine, exhaust mani-
fold and silencer in particular, this also applies to all
maintenance work on the mowing unit.
- Disconnect the spark plug connector from the spark
plug.
m WARNING!
Health hazard!
Inhaling petrol/lubricant vapours may lead to severe
health damage, loss of consciousness and, in extreme
cases, to death.
- Do not inhale petrol/lubricant vapours.
- Operate the product outdoors only.
NOTE!
Risk of damage!
Water entering the housing can cause engine damag-
es. In addition, the jet of a high-pressure cleaner can
damage parts of the product.
- Clean the product with a cloth, hand brush, etc.
- Do not immerse the product in water or other liquids
and do not spray it with a high-pressure cleaner.
60 | GB
www.scheppach.com · service@scheppach.com
Maintenance plan
after 10
operating
hours
Air filter
Clean
Spark plug
Check
Expert inspection required:
• when the petrol ride-on lawnmower passes over a
large object,
• if the engine suddenly stops,
• if the cutting blade is bent (do not straighten it your-
self!),
• if the transmission is damaged.
13.1 Cleaning work:
m WARNING!
Danger of injury!
Unintended and unexpected start-up of the product
may lead to injuries.
- Switch off the engine before carrying out any clean-
ing or maintenance work and after the engine has
cooled down, disconnect the spark plug connector
from the spark plug.
NOTE!
Risk of damage!
If the product and its attachment devices are not
cleaned regularly, grass/weed debris may become
trapped underneath the petrol ride-on lawnmower.
This can affect the performance of the product and
cause damage in the long run.
- Clean the product with a cloth or a hand brush, etc.
- Do not immerse the product in water or other liquids
and do not spray it with a high-pressure cleaner.
- Keep the handles free of oil so that you always have
a secure grip.
13.2 Cleaning the device with water (Fig. 1)
1.
Place the hose connector on the water connection
(7) of the petrol ride-on lawnmower and open the
water tap.
2.
Start the petrol ride-on lawnmower and switch on
the mowing unit (8) by pushing the lever for the
mowing unit (3) forward and to the right until it en-
gages. The rotating cutter bar dashes the water
against the underside of the petrol ride-on lawn-
mower and in doing so cleans it.
3.
After approx. 30 seconds, switch off the petrol
ride-on lawnmower and the mowing unit (8) again.
after 25
Every 50
operating
operating
hours
hours
Clean
Replace
Clean
Replace
Werbung
