Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SiqnalAnalyzer
3.52
| 1/1 ZOOM Mode
€-HOUE Mode
ile
Name
;:
TESTS
»- SCP
i
HELP
Fe
CURS
FS
SWAP
F4
ZOOM
FS
WINDOW
Fo
CALC
FY
UIEW
FS
GRID
FS
OPT.F1@
END
Introduction
The HAMEG Oscilloscope Software SP91-2 Version >3.61,
referred to as PROSCOPE in the following, is a program
developed
for professional
capture
and
evaluation
of
measurement
values
in laboratories,
workshops
and
production facilities. It supports theHAMEG digital storage
oscilloscopes, which can be connected using a member of
the HO69 and HO79 interface series, version -2 or higher.
Largely operated by means of function keys and menus,
this software
is specifically intended for manual
and
automatic capture of oscillograms. To evaluate
them, a
number of cursor and zoom functions are provided, as
well ascalculation andstorage routines. The measurement
cursors constitute a special feature of the program. These
permit bit-by-bit (i.e. measurement point by measurement
point) precise evaluation of measured signals in both, the
horizontal (x) and the vertical (y) axis.
A maximum
of 8 channels can be displayed. A split
function is provided that lets each channel be viewed and
measured in its own window.
39
Werbung
