Identification Of Manufacturer And Appliance; Procedure For Requesting Service - Angelo Po 0N0TPG Bedienungshandbuch

GENERAL INFORMATION

IDENTIFICATION OF MANUFACTURER AND APPLIANCE

The nameplate shown here is fi tted directly to
the appliance. It contains references and all es-
sential information for safe operation.
One (fi g.1) contains references and all essential
information for operating safety, and the other
(fi g.2) provides gas information for each coun-
try of use.
Appliance model
A)
Type of customisation
B)
Manufacturer's nameplate
C)
Type of fume exhaust vent
D)
Serial number
E)
Protection rating
F)
CE marking of conformity
G)
Reference standard
H)
For all requirements contact the agents or the
headquarters of Angelo Po which can be found
in the contacts section of the website http://
www.angelopo.com.
3320091_ut_GB

PROCEDURE FOR REQUESTING SERVICE

CE marking
L)
Product family type
M)
Gas pressure
N)
Appliance category
P)
Gas consumption
Q)
Rated power (kW)
R)
Gas type
S)
Code of country of destination
U)
Date of construction
V)
Voltage (V)
W)
Frequency (Hz)
X)
Rated power (kW)
Y)
Injector diameter
Z)
When requesting service, state the data pro-
vide on the nameplate and provide a descrip-
tion of the fault.
ENGLISH
15